CO2 Carbonation Tools

Sold Out $ 9.89

Diffusion stones, or 'air stones', are commonly used to aerate wort or artificially carbonate beer and other beverages. Diffusion Stones can be attached to compressed oxygen tanks, CO₂ tanks or air pumps. It is composed of stainless steel and has a 2 micron stone with a 1/4in OD barbed fitting. Diffusion stones require a high pressure which is easily achieve with compressed gas or high-powered air pumps. However, low-powered air pumps may not work well. Do not handle diffusion stone with bare hands because oils and dirt from skin can clog the pores.
Stone Length: 15/16in (24mm)

Overall Length: 1-13/16in (46mm)

Stone Diameter: 1/2in (12.5mm)

Barbed Fitting Outside Diameter: 1/4in (6mm)

Pore Size: 2 micron

Material: Stainless Steel
Clean and sanitize diffusion stones thoroughly before and after each use. Boiling the stone for at least 5 minutes in clean water is the only reliable way to clean and sanitize it completely. It is important that the air being fed into the stone is clean to prevent contaminants from clogging the stone or infecting the wort. Ensure a clean air source or install an air filter. Avoid touching the porous surface of the stone to prevent any of the pores from becoming clogged.

Sold Out $ 19.99

Handheld CO2 charger fits 1/4in MFL fittings for portable draft beverage dispensing. Accepts 16 gram CO2 cartridges (available separately).
Thread Size: 1/4in FFL

Required Cartridge Size: 16 gram

Material: Plastic, Metal

Overal Length: 5-3/16in (132mm)

Overal Width: 1-1/4in (32mm)

Sold Out $ 15.99

The CarbaCap is able to carbonate plastic PET bottles using standard CO₂ equipment. Attach the CarbaCap to a standard PET bottle and apply pressure with a CO₂ tank through a ball-lock keg disconnect. It can not only carbonate homemade beer, cider or soda, but it can re-carbonate commercial beverages that have lost carbonation. It can be used to carbonate a wide variety of beverages including sparkling water, wine, soft-drinks and many more!
Height: 1-23/32in (44mm)

Overall Width: 1-3/8in (35mm)

Fitting Type: Ball-Lock
- Compatible with ball-lock soda keg disconnects.
- Compatible with standard PET plastic bottles (does not work with eco-friendly plastic bottles with narrow threads).

Stone Length:	15/16in (24mm)
Overall Length:	1-13/16in (46mm)
Stone Diameter:	1/2in (12.5mm)
Barbed Fitting Outside Diameter:	1/4in (6mm)
Pore Size:	2 micron
Material:	Stainless Steel