Small Hard Cheese Mold with Follower

Cleaning:
Machine wash with unscented detergent before use. After using, rinse in cold water to remove all cheese particles then machine wash with an unscented detergent. Submerge in boiling water for 15 minutes if necessary to sanitize.

Helpful Notes:
In some cheese recipes, the cheesecloth may be more prone to stick to the cheese or become hard to remove. This is most evident in cheeses that produce higher acid levels in the mold which causes the cheese to shrink, pulling in the cheesecloth. This can be minimized by wetting the cheesecloth with a weak salt brine which will slow the acid production near the rind. The problem may also be caused by too much pressure when forming the mold and not turning the curds soon enough. If you have this problem, simply scrape the surface of the cloth slightly where it is sticking while making sure not to tear the rind.

Cleaning:
Machine wash with unscented detergent before use. After using, rinse in cold water to remove all cheese particles then machine wash with an unscented detergent. Submerge in boiling water for 15 minutes if necessary to sanitize.

Helpful Notes:
In some cheese recipes, the cheesecloth may be more prone to stick to the cheese or become hard to remove. This is most evident in cheeses that produce higher acid levels in the mold which causes the cheese to shrink, pulling in the cheesecloth. This can be minimized by wetting the cheesecloth with a weak salt brine which will slow the acid production near the rind. The problem may also be caused by too much pressure when forming the mold and not turning the curds soon enough. If you have this problem, simply scrape the surface of the cloth slightly where it is sticking while making sure not to tear the rind.

Yield:
1/2 tablet will set 2 US gallons (7.6L) of milk in approximately 45 minutes at 86-95F (30-35C).

Directions:
1) Dissolve one crushed tablet completely in 1/4 cup (59mL) of fresh, non-chlorinated water. Let the solution stand for 20 minutes before using.
2) For better results, the milk should be warmed to 95F (35C) before adding the solution to the milk.
3) Pour the solution into the warmed milk and stir vigorously.
4) Let the milk stand until set (Approximately 40 to 45 minutes).
5) If you wish to use a lactic culture, add it to the milk before the rennet tablet solution.
6) NEVER keep part of rennet solution for later use.
7) When using store bought milk you may need to add a little more rennet.

Storage:
Store rennet tablets in the freezer. They will last at least 3 years if stored properly.

Yield:
Each packet will set up to 2 US gallons (7.6L) of milk.

Directions:
Add 1 packet to your milk at proper temperature when recipe calls for adding starter culture.

Storage:
Keep packages in the freezer, they will last up to 2 years if stored properly.

Refrigeration:
This item should be stored in the freezer for maximum quality. It does not require an ice pack during shipment but it can be purchased separately. Freeze items upon arrival for highest quality and shelf-life.

Yield:
1/2 teaspoon will set 2 gallons of milk in approximately 45 minutes. One 2oz (59mL) bottle is sufficient to set up to 48 US gallons (182L) of milk.

Directions:
The amount to use will vary on the condition of your milk, season and type of cheese you are making. Dilute required amount of rennet with 20 times its volume of cool, potable water. Immediately add into milk and stir for 2 minutes to uniformly distribute.

Storage:
Store rennet in the refrigerator. Will keep up to 12 months when stored properly.

International Shipping Note:
This item may not be shipped to Australia or New Zealand due to import restrictions.