Straight-A Premium Cleanser, 8oz

1. Drain beer from lines
2. Mix 0.5 oz BLC per quart of water
3. Pump solution into line
4. Allow solution to sit or recirculate
5. Completely rinse line with clear water
6. Re-tap beer, open tap until beer flows
7. Discard 1st glass and test beer

Home Brewing Recommendations:
Allow bottles, parts, fittings, carboys, etc. to soak in 1oz BLC per gallon of water. Additional product or scrubbing may be required.

- At only a few cents per application, B-L-C Beer Line Cleaner is a value-focused way to remove beer stone, biomass, organics and mineral deposits from beverage lines.

- B-L-C is a liquid product that does not cake or harden and it mixes instantly. This nitrate free formulation is also low in phosphates and 100% biodegradable. B-L-C works with all electrical, mechanical and hand driven cleaning units.

- The primary active ingredient in B-L-C is potassium hydroxide, an alkaline compound with easy rinsing qualities that is less corrosive to metal parts and fittings. We blend potassium hydroxide with a proprietary blend of surfactants and chelating agents to help the caustic loosen and suspend soil. B-L-C also works with your budget! At 2 ounces of B-L-C per gallon of water, a 33 oz. container makes 16.5 gallons of powerful, quality cleaner.

- B-L-C is a highly-effective cleaner and one of our milder brands of liquid beverage line cleaner. B-L-C is ideal for direct draw systems, tap boxes, or any system that uses shorter runs.

- Attention Craft Brewers! Though it was formulated for cleaning lines, B-L-C is fantastic for small craft and home brewing operations. B-L-C quickly enters solution, removing and suspending soil in all water temperatures without extended contact times or excessive rinsing. B-L-C is also easier on hands than most brewing-specific products.

Fill growler with warm water. Add 1 tablet and let dissolve. Soak for 10 minutes. Empty growler and rinse thoroughly. Repeat if necessary.

Tips for Heavy Soils:
- Use 2 tablets
- Let soak overnight, up to 24 hours
- Increase water temperature

1. Mix 1oz per gallon of water.
2. Apply to surface.
3. Allow 10 minutes of contact time.
4. Drain and allow the surface to air dry.
5. Rinse and sanitize just prior to use.

1. Mix at a rate of 1/2oz per gallon of water.
2. Circulate for a minimum of 5 minutes.
3. Rinse.
4. Repeat until rinse water appears clear.